Why PVC Flooring Wire Will Fall Off

Wire off will not only affect the appearance, but also cause vinyl sheets bulging. Do you know the cause of the welding line fall off?

1.Improper installation
PVC floor welding standard construction methods are as follows:
Welded two floors should be fully accessible to ensure that the wire and the vinyl floor has the largest area of bonding. The following pictures are displayed:
Right:

Wrong:

Notice:
*The temperature of the torch should be set at about 350 degrees to dissolve the wire.
*With the appropriate welding speed (to ensure that the wire melting), the electrode will be squeezed into the well into the well and firmly. Then uniformly squeeze the wire into the open slot and stick.

2.Wet ground
As the ground is wet or glue is dissolved, resulting in PVC floor by pulling the shift, the wire is also pulled off.

Once found PVC wire off, it is necessary to timely repair to reduce the larger area affected.